Sustainable Energy for a Better Future
Eastpack Hotel Yogyakarta, Indonesia | 13 – 14 September 2017
Batch 1
Full Paper Submission Deadline Batch 1: 15 May 2019
Notification of Acceptance Batch 1: 15 June 2019
The 1st ICET4SD 20151st ICET4SD 2015
The 1st ICET4SD 2015 published on IOP Conference Series: Materials Science and Engineering (Vol. 105), indexed by Scopus
It is a great pleasure to extend to you an invitation to participate in the 2nd International Conference on Engineering and Technology for Sustainable Development (ICET4SD) that will be held at Eastparc Hotel Yogyakarta, Indonesia on 13-14 September 2017.
ICET4SD with the theme of “Sustainable Energy for a Better Future” is an international conference organized by the Faculty of Industrial Technology (FIT), Islamic University of Indonesia (Universitas Islam Indonesia – UII) in collaboration with UII’s strategic partners Kansai University, Osaka, Japan and Center for Energy Studies, Gadjah Mada University, Indonesia.
As an international academic forum, the conference aims to exchange ideas, knowledge and expertise on various fields such as chemical engineering, electrical engineering, industrial engineering and management system, informatics, mechanical engineering, and other engineering disciplines through various sessions consisting of keynote lectures, oral presentations and discussions. The conference is also expected to foster networking, collaboration and joint effort among the conference participants to advance the theory and practice as well as to identify major trends and critical issues in those fields.
Yogyakarta, a special district of Indonesia, is well known with its magnificent cultural heritage. Warm welcome from residents, solid Javanese culture, educational atmosphere and many other remarkable qualities among others will comfort you once you have arrived in Yogyakarta. Your stay will last as memorable journey as you will be spoiled by great views, culture and heritage tourism. This city will welcome you, the participants of the 2nd ICET4SD 2017!
IMPORTANT DATES
Batch 2
Full Paper Submission Deadline Batch 2: 15 July 2019
Notification of Acceptance Batch 2: 15 22 25 August 2019 (delayed)Extended Submission Deadline
[FINAL] Extended Full Paper Submission Deadline :
30 July, 2019 15 25 August 2019
Last Notification of Acceptance :30 August, 2019 17 September 2019
Camera Ready Deadline
24 September 2019Early Bird Registration Deadline
23 August71925 September 2019Regular Registration Deadline
2330 September 2019Conference Dates
23 – 24 October 2019
KEYNOTE SPEAKERS
Prof. Hiroshi Tamura
(Kansai University, Osaka, Japan)
Dr. Deendarlianto
(Center for Energy Studies, Gadjah Mada University, Indonesia)
Prof. Somnuk Tangtermsirikul
Sirindhorn International Institute of Technology, Thailand (in confirmation)
SCOPE
Topics of interest for submission include, but are not limited to:
Chemical Engineering
- Chemical reaction engineering
- Separation technology
- Renewable and sustainable energy technology
- Biofuels
- Carbon capture
- Utilization and storage (CCUS)
- Green technology
- Fuel cells
- Biotechnology
- Environmental technology
- Food technology
- Advanced materials
- Nanotechnology
- Process modeling and simulation
Industrial Engineering
- Ergonomics,
- Industrial management
- Operation research
- Manufacturing system
- Supply chain management
Electrical Engineering
- Green energy
- Smart city
- Biomedical engineering
- Disaster mitigation technology
Informatics Engineering
- Medical informatics
- Information systems
- Enterprise information system
- Software engineering
- Intelligent computing systems
- Network and security systems
- Digital forensics
- Multimedia
- Computer vision
- Signal processing
- Internet of Things
- Game programming
- UX
Mechanical Engineering
- Manufacturing technology
- CAD/CAM/CAE
- Automation and robotics
- Materials
- Energy conversion
- Modeling and simulation
- Engineering design
- Product design
Textile Engineering
- Fashion product design
- Textile structure
- Textile design, natural fibers
- Natural dyes
- Blending and mixing
- Textile waste treatment
COMMITTEE
Advisors
Assoc. Prof. Iman Djati Widodo
Dr. Sri Kusumadewi
Conference Chairman
Dr. Sholeh Ma’mun
Deputy Chairman
Dr. M. Ridwan Andi Purnomo
Secretary
Nur Indah F. M., M.Eng.
Treasurer
Vembri Noor Helia, M.T.
Editorial Board
Dr. Elisa Kusrini
Dr. Ifa Puspasari
Dr. Izzati Muhimmah
Dr. R.M. Sisdarmanto Adinandra
Dr. Risdiyono
Head of Publication & Sponsorship
Rahmat Riza, M.Sc.
Head of Logistic
Setyawan Wahyu Pratomo, M.T.
Technical Committee
Harwati, M.T
Lizda Iswari, M.Sc.
Supporting Staff
Diana, S.T.
Risky Falahiyah, S.Kom.
- Prof. Hiroshi Tamura (Kansai University – Japan)
- Prof. Somnuk Tangtermsirikul (Sirindhorn International Institute of Technology – Thailand)
- Prof. Reyer Zwiggelaar (Aberystwyth University – UK)
- Prof. S. W. Lin (National Taiwan University of Science and Technology – Taiwan)
- Prof. R. J. Kuo (National Taiwan University of Science and Technology – Taiwan)
- Prof. Jerry Chung-Chi Hsieh (National Cheng Kung University – Taiwan)
- Prof. I Made Bendiyasa (Gadjah Mada University – Indonesia)
- Prof. Hari Purnomo (Islamic University of Indonesia – Indonesia)
- Prof. Senator Nur Bahagia (Bandung Institute of Technology – Indonesia)
- Prof. Budi Santosa (Sepuluh Nopember Institute of Technology – Indonesia)
- Prof. Mochammad Noer Ilman (Gadjah Mada University – Indonesia)
- Prof. Mauridhi Hery Purnomo (Sepuluh Nopember Institute of Technology – Indonesia)
- Prof. Mulyadi Bur (Andalas University – Indonesia)
- Assoc. Prof. Soorathep Kheawhom (Chulalongkorn University – Thailand)
- Asst. Prof. Dechrit Maneetam, D.Eng (Rajamangala University of Technology Thanyaburi – Thailand)
- Assoc. Prof. Ahmad Hadi (Universiti Teknologi MARA – Malaysia)
- Dr. A. Hartono (Norwegian University of Science and Technology – Norway)
- Dr. Inna Kim (SINTEF Materials and Chemistry – Norway)
- Dr. Luís Ferreira Pires (University of Twente – the Netherlands)
- Dr. Suchada Rianmora (Sirindhorn International Institute of Technology – Thailand)
- Dr.techn. Saiful Akbar (Bandung Institute of Technology – Indonesia)
- Dr.-Ing. Nasruddin (University of Indonesia – Indonesia)
- Dr. Jamari (Diponegoro University – Indonesia)
- Dr. Tutun Nugraha (International University Liaison Indonesia – Indonesia)
- Dr. Yalun Arifin (Prasetiya Mulya University – Indonesia)
- Dr. Muthia Elma (Lambung Mangkurat University – Indonesia)
VISA INFORMATION
Visitors in Indonesia that have purpose such as participating seminars, are required visit visa that is issued by Indonesian Embassy. Besides that, visitors also have to make sure that their passport are valid for at least six month from the date of arrival and have a valid return ticket. The immigration officer at the port of entry may ask the passenger to produce any necessary documents (such as hotel reservation and proof of finance). There are two types of Visit Visa that can be used :
- Visit Visa on Arrival
- This visa can be applied for if the nationality of the applicant(s) are included on the Visa on Arrival countries list.
- Requirements :
- A valid passport that is still valid for at least 6 (SIX) months from the date of request
- Valid return tickets to and from the country
- Visit Visa
- Foreigners can apply visit visa in Indonesian Embassy or Consulates, or the guarantor could apply to the Directorate General of Immigration in Jakarta, Indonesia
- Visit Visa is issued in Indonesian Embassy or Consulates
- Requirements :
- A valid passport that is still valid for at least 6 (SIX) months from the date of request
- Valid return tickets to and from the country
- Letters of application and guarantee from the applicant(s) and guarantor(s)
- A copy of valid bank accounts, living cost and spending plans while in Indonesia
- ID photo in full color, dimensions of 4 x 6 cm
Visa Procedure :
- Applicant(s) submits visa application to local Indonesian Embassy/Consulates and pays the required amount (telex fee payment)
- Embassy/Consulates checks application for approval / forwards application to the Directorate General of Immigration for approval (for stateless/non-nationality persons).
- If the requirements are satisfied and payments have been made, the visa should be issued within 3 business days.
- Applicants proceed to Indonesia. Entry stamps will be obtained in the border or upon arrival.
For more info about visit visa information, you can click this link.
AUTHOR GUIDELINES
- The manuscript must be prepared in English with a minimum 4 pages and a maximum of 6 pages (extra pages:US$ 10/page-max 8 pages) in the A4 document size
- Please download the manuscript templates for conference proceedings (ieee explore double-column format (including tables, figures, and references)):
Microsoft Word
Latex - Please pay attention to use margins of 25 mm on top and bottom of the pages.
- The full paper must be submitted in PDF format to ICET4SD Submission System via EDAS Conference and Journal Management System: http://edas.info/N25741
- Accepted paper must be registered and presented at the conference by at least one of authors
REGISTRATION FEES
|
Early Bird |
Regular |
|
| International Participants |
USD |
USD |
| Presenter |
400 |
450 |
| Additional Paper |
200 |
250 |
| Listener |
200 |
200 |
| Domestic Participants |
IDR |
IDR |
| Presenter |
3,000,000 |
3,500,000 |
| Additional Paper |
1,500,000 |
2,000,000 |
| Listener |
1,500,000 |
1,500,000 |
All payment should be made to:
International participants, payment should be made by EDAS Conference System.
Domestic participants, payment should be made through:
Bank Mandiri
Account Name: Universitas Islam Indonesia
Account Number: 137.00.1151356.7
Address:
Bank Mandiri Cash Outlet Yogyakarta UII
Rectorate Building, Islamic University of Indonesia
Jl. Kaliurang Km.14,5 Yogyakarta Indonesia 55584
POSTER
PHONE
Phone: +62 274 895287 ext. 148
Fax: +62 274 895007
ADDRESS
Faculty of Industrial Technology
Gedung KH. Mas Mansyur
Universitas Islam Indonesia
Jl. Kaliurang KM. 14,5 Sleman Yogyakarta 55584